The Tightness Of The Stainless Steel Laundry Sink Is Important (Business Opportunities - Other Business Ads)

USNetAds > Business Opportunities > Other Business Ads

Item ID 129981985 in Category: Business Opportunities - Other Business Ads

The Tightness Of The Stainless Steel Laundry Sink Is Important


Stainless Steel Laundry Sink installation method:
1, the sink position should be reserved
Reserve a good sink and provide the approximate size of the sink when ordering the sink. It is best to have a floor plan provided to avoid rework and lead to rework. When the sink is installed, the position reserved for the countertop should match the volume of the sink. The sink should be installed firmly and the tank should not be shaken from side to side. The installation of the sink is not a big project in the whole decoration, but pay attention to the sealing of the joint as much as possible during the installation process.

2, first install the faucet and inlet pipe
Install the faucet and inlet pipe before installing the sink. In addition, one end of the inlet pipe on the faucet is connected to the water inlet switch.

3, the sink is placed on the countertop
After placing the countertop, it is necessary to install a matching hanging piece between the trough and the countertop. The sink should be installed firmly and the tank should not be shaken from side to side. The installation of the sink is not a big project in the whole decoration, but pay attention to the sealing of the joint as much as possible during the installation process.

4, overflow hole, filter basket seal
The degree of sealing of the overflow hole and the filter blue is affecting the use of the sink in the future. Therefore, the degree of sealing of the overflow hole and the filter blue is very important. After the installation is completed, it is necessary to check the sealing of the overflow hole and the filter basket.

5, install supporting hanging pieces
The final step of the installation is to install the matching hanging piece of the sink. After the general sink is bought, the worker will cut the countertop of the cabinet according to the size of the sink. After placing the countertop, it is necessary to install a matching hanging piece between the trough and the countertop. When installing, avoid small gaps and cause the tank to shake to better prevent leakage in the future.


6, drainage test, edge banding
After the installation is completed, a drainage test is carried out, the water tank is filled with water, and the drainage of the sewage water and the overflow hole is tested. If there is any water seepage when draining, rework immediately. After the drainage test, ensure that there is no problem, the sink can be sealed. When sealing with silicone, ensure that the gap between the sink and the table is even and there is no water seepage.

information about Stainless Steel Laundry Sink : https://www.afastainlesskb.com/product/

Related Link: Click here to visit item owner's website (0 hit)

Target State: Arkansas
Target City : YuYao
Last Update : Sep 28, 2018
Number of Views: 196
Item  Owner  : afastainlesskb
Contact Email:
Contact Phone: (None)

Friendly reminder: Click here to read some tips.
USNetAds > Business Opportunities > Other Business Ads
 © 2019 USNetAds.com
2019-06-27 (0.081 sec)