Stainless Steel Handmade Sink Manufacturers Share The Relevant Parameters Of The Sink (Automobiles & Vehicles - Motorcycles)

USNetAds > Automobiles & Vehicles > Motorcycles

Item ID 130218631 in Category: Automobiles & Vehicles - Motorcycles

Stainless Steel Handmade Sink Manufacturers Share The Relevant Parameters Of The Sink

First, the length and width of the stainless steel sink. Stainless steel sinks are not fixed in length and width and can be used by merchants to find manufacturers. However, there is a range of sizes available in the market, and Stainless Steel Handmade Sink Manufacturers will tell you about it. The length of the small single basin sink is generally around 400-550mm. The length of large single basins and double tanks are generally around 750mm, but some can reach 900mm. In addition to this, there are three basins or wing types with different lengths.

Second, the width of the sink, the width of the stainless steel sink is similar, generally around 450mm, because our countertops are generally 450mm, 500mm or 550mm countertops. When we choose the sink, we should measure the width of the countertop, and then we should buy the width of the sink when we subtract 5 cm. After buying it, be sure to dig holes according to the size on the manual. If the size of the sink is too wide, the edge of the countertop will be too narrow, so that the area of ​​the force is reduced, and the marble countertop is easily crushed. If the sink is too narrow, it is not ergonomic and will cause washing. The body is going to operate and it is not good for the body.

Three said the depth of the sink! The depth of the sink is similar. In general, it is 180-220mm deep. The depth of this range is more suitable. It is not good when it is too deep or too shallow. If it is too deep, it will cause us to bend over and bend. It will be very tired after a long time. And it will indirectly waste water; too shallow will cause splashes of water, increase the time to clean the countertops, and indirectly waste water. Since the family members are different in height and size, it is best for them. It is not recommended here.

Four said the inner corner of the sink! The inner corner of the sink is still one of the selling points of many sink merchants. Indeed, the inner corner is actually close to 90 degrees, which can increase the volume of the sink. However, if it is too close, it will leave a sanitary corner. recommend. So close to 90 degrees and a smooth transition is the best way to handle the inner corners.

Five said the thickness of the sink! The thickness of the sink is generally between 0.8mm and 1.0mm, which is the most reasonable size. Here, it is not necessarily good, the big brand's sink must be 1.0mm, not necessarily the second, the OEM sink is 0.8mm, because there are many places to evaluate the sink, it will also involve the process of the sink. and many more. If it is too thinner than 0.8mm, it can affect the service life of stainless steel.

Six said the edge treatment of the sink. The edge of the sink is generally as thin as possible. Why do you say that the sink does not completely prevent water seepage even if it is coated with silica gel at the edge. The thin-edged sink can be perfectly combined with the countertop to minimize water seepage. But at the same time, the problem with thin edges is that it is difficult to achieve flatness and load the same weight. However, scientists have already thought of this problem for users, some have cuffing treatment, and some are spot welding ribs.

Finally, the surface flatness of the sink is said. Smooth edges (not more than 0.1mm) can avoid water seepage. There is also a flat overall, do not have drums or dents. Because it will affect our feelings, degreasing, beauty, wear and many other factors.

information about Stainless Steel Handmade Sink Manufacturers :

Related Link: Click here to visit item owner's website (0 hit)

Target State: Arizona
Target City : Yuyao
Last Update : Mar 25, 2019
Number of Views: 119
Item  Owner  : afastainlesskb
Contact Email:
Contact Phone: (None)

Friendly reminder: Click here to read some tips.
USNetAds > Automobiles & Vehicles > Motorcycles
 © 2020
2020-02-24 (0.111 sec)