Floating Dock Factory Introduces The Installation Details Of The Buoy Pump Station
Floating Dock Factory introduces the installation and use of floating pump station:
1. After the goods arrive at the scene, check and accept the goods according to the delivery list.
2. Put the pontoon on the flat ground, connect the deck to the pontoon, and match them by color (red to red, yellow to yellow, the same below).
3. Put the pontoon platform into the working water area and connect it loosely with the cattle on the shore through steel cables.
4. Assemble the manual hoist frame on land, and also match the colors (same as above).
5. Install and fix the manual hoist frame on the pontoon deck and match the colors (same as above).
6. Put the submersible electric pump into the gondola and fix it on the gondola through the clamps, then put the gondola into the water through the manual hoist to determine the draught and connect it to the pontoon deck through the hanging plate (same as above), and connect the outlet pipe at the same time .
7. Connect the inter-deck pedestrian board to the deck by bolts, and cover the steel grating on the hanging basket.
8. Connect the power supply of the pump equipment.
9. Install steel ladders for employees to go up and down.
10. Move the buoy platform pumping station to the working water area, drop the Hall anchor and fix it on the anchor pile, tighten and fix the buoy platform pump station with the cow steel cable, and install a fixed protective fence (ibid.).
Through the above introduction, Pu Cheap Boxing Equipment Manufacturers hopes that you can simply refer to the content of this article in future use.
|Related Link: Click here to visit item owner's website (0 hit)|
|Target State: Illinois|
Target City : All Cities
Last Update : Aug 30, 2021 5:30 AM
Number of Views: 88
|Item Owner : taizhouglejin|
Contact Email: (None)
Contact Phone: (None)
|Friendly reminder: Click here to read some tips.|